Juno JH081C5 Manual de usuario Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
1. Turn the knob clockwise to position 9.
2. Turn the knob slowly to the symbol
until you can hear a click. The two
cooking zones are on.
3. To set the necessary heat setting refer
to "Heat settings".
CLOCK FUNCTIONS
Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set countdown time. This function has no effect on the oper-
ation of the appliance.
Setting and changing the time
You must set the time before you operate
the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer is
not set.
Press the or to set the correct time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press again
and again until starts to flash.
Setting the DURATION
1.
Set an oven function and temperature.
2.
Press
again and again until
starts to flash.
3. Press
or to set the DURATION
time.
The display shows .
4. When the time ends, flashes and an
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and the knob for the temperature to the
off position.
Setting the END
1. Set an oven function and temperature.
2. Press
again and again until starts
to flash.
3. Press or to set the time.
The display shows
.
4. When the time ends, flashes and an
acoustic signal sounds. Press any
button to stop the signal.
5.
Turn the knob for the oven functions
and the knob for the temperature to the
off position.
6.
The appliance deactivates
automatically.
9
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 51 52

Comentarios a estos manuales

Sin comentarios